Ben3099

Hey, Cord is chopped near the laser. There is enough there to attach another to it however the problem would be attaching it the switch inside so it would be able to function properly. Any ideas of how to hook it up on the inside and/or pictures for assembly inside the unit? Also, since I am not sure the function of light guns, does the switch inside create a break in signal, thus designating an input? In other words, the light gun unit is always on and when you press the trigger, it hits the switch and creates an input? Thanks!

Alright, I have a unique question that I wanted to ask this community. In the very near future, I may have access to a MACS rifle and cartridge. The cartridge is fine, however the rifle is, well, kind of in pieces. To that end, the dummy rifle is still one complete piece, however the electronics to the light laser have kind of been trashed and the connecting cable from the laser has been cut. I wanted to know if there was anyone that had pictures of a fully assembled rifle, especially pictures of where the laser connects to the rifle. There is a bag of parts that came along with everything and their is a chance to fully reassemble everything, however I need some other pictures of the assembly or possible documents for assembly to see if this is feasible. Also, I wanted to know if a normal controller cord could be connected to the cut laser cord to have it connect into the system. Any thoughts? Thanks!